Welcome to Heyuan Boer Technology Co., Ltd.

图片展示

What problems will directly affect the function of the miniature vacuum pump?

Author:河源市柏尔科技有限公司 Click: Time:2018-12-23 14:13:42

For the function of the vacuum pump, there are mainly: internal leakage, steam impact, vacuum pump layout and environment, etc. Let's take a detailed look below.

1. Pump body layout:

As for single-stage vacuum pump, the simple wear part is the steam nozzle. When the nozzle is worn out, it will not only affect the function of the pump, but also add the operating cost of the system.

2. Environment:

The environmental impact mainly refers to the pollution of pumped gas to the system. In the process of disposal of molten steel, a lot of gas will be released from molten steel, together with some fine particles such as oxide powder skin, which will accumulate and adhere to the pump body, reduce the flow conductivity of the pumping pipeline, prolong the pumping time and reduce the pumping function.

3. Condensate:

Condensate water plays an important role in multi-stage vacuum pumps. In order to ensure that condensate can be fully condensed, it is necessary for the partial pressure of water vapor in the discharge pressure of vacuum pumps to be higher than the corresponding full vapor pressure. Therefore, the temperature of condensate water should be lower than the full temperature under the pressure, so that the normal operation of the pump body can be covered.

In addition, the condensation power of the condenser is also very important. The poor condensation effect of the condenser will make the steam enter the next stage pump directly because it is too late to condensate, increase the load of the later stage pump, and affect the pumping ability of the pump. Therefore, the inlet temperature, flow rate of condensate and the operation of condenser have great influence on the function of the pump.

4. Steam:

Steam ejection vacuum pump is based on full water vapor as the working medium. The condition of steam has a decisive influence on the function of the pump. Wet steam not only affects the function of the pump, but also corrodes the steam nozzle and adds the amount of steam to the pump, which makes the operation of the pump unstable.

5. Internal leakage

The nozzle of the vacuum pump is composed of two parts, which are connected by flanges. As for the vacuum pump with connecting flanges in the pump body, if the leakage of steam is formed at the connecting part due to sealing and other reasons, the function of the vacuum pump will be affected.


图片展示

Contact us

 

Telephone:0762-3600468

Email:boer@hyboer.com

Website:www.hyboer.com

Address:Building B of the Fixed Brand Innovation Science and Technology Park on the South of High-tech Fourth Road in Heyuan High-tech Zone

图片展示
Mobile Wechat
图片展示
Public Number

Copyright  ©  2019  www.hyboer.com   All Rights Reserved . Heyuan Boer Technology Co., Ltd.  Copyright    Website filing: Guangdong ICP 19038852

Service Center
热线电话
0762-3600468
上班时间
周一到周日
Qrcode
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了